UPS / Power Supply ATE

Category: 

Testers

Type:

UPS ATE

Application:

Bench Top-Inservice Utility

 

UPT-1000  -  Coming Soon

UPT 1000
UPS Bench Top Tester



Autotest introduced The UPT 1000 UPS Tester to meet the popular demand for a quality tester for small, low cost UPS's. This aggressive new design includes many of the capabilities of the powerful UPT 2000 Production Tester, in a convenient, cost effective bench top configuration.

 

UPS technological advancements have resulted in high performance power supplies that are less costly and easier to manufacture. Today's smart UPS provides computer ports, not only for network communications, but also for configuring, calibrating and testing the UPS. But is there ATE available to Calibrate and Test them? The UPT 1000 from Autotest Company provides an ideal and cost affective UPS ATE. By streamlining the technology of the UPT 2000, Autotest has developed a Universal UPS Tester specifically for the fully cased UPS.  It starts as a Bench Top UPS ATE, with growth potential to any full rack package.  

Autotest's UPT 1000 is enhanced by APG for WindowsTM, the industry accepted software standard. This versatile and powerful ATE software package combines the power of the Microsoft’s Windows 95 platform with the flexibility and precision of Autotest's modular instrumentation systems. APG's Application Specific language approach, along with interactive program creation, diagnostics modules and the DART (Design and Repair Testing) real-time control and display system, combine to take full  advantage of the UPT 1000's instrumentation superiority. This provides the fast, user-friendly universal testing approach demanded by state-of-the-art ATE users.  

UPT 1000 standard configurations may be used as sub-assembly or final assembly UPS testers, with the ability to automatically provide  stimulus and measurement calibration and verification. With the versatility of the Windows based software, the UPT 1000 can download configuration and calibration data as part of the computer interactive UPS assembly test program.  The only sacrifice from the full feature UPT 2000 is the DC bus and Battery Emulation capabilities.

 

Enhanced Test Abilities Include:

      Calibration and Configuration Download

      RS232 Communications

      SNMP Communications

      UPS Logic Status

      Crest Factor AC Load Regulation

      On Line Efficiency

      Short Circuit Protection

      THD

 

Autotest UPT-1000 Specifications

CONTROLLER

CPU:
Pentium
Memory:
Dynamic RAM
4.3+ GB Fixed Hard Drive
3 ˝, 1.44 MB Diskette Drive
CD Rom Drive
Video:
Industry Standard Super VGA Color Monitor
Mouse:
Microsoft Compatible Mouse
Peripheral I/O:
RS 232C, parallel interface, PCI IEEE-488
(additional parallel/serial ports, and modem available)

MEASUREMENT SYSTEM - SIMULTANEOUS LINE SOURCE:

UPS Source:
RMS voltage, RMS current, peak current,
peak Inrush current, True power
UPS Output:
RMS voltage, RMS current, peak current,
peak Inrush current, True power

DIGITAL DRIVER/RECEIVER INTERFACE:

16 TTL / RS422 drivers/receiver w/ programmable references
Optonal:

DC voltage, DC current, peak current, peak Inrush current, 6˝ Digit Multi-Function DMM

   

SOURCES AND LOADS

SOLID STATE AC SOURCES

Standard

Power:           2100 VA Single Phase Auto-transformer
Voltage:     0 - 270 VAC
Accuracy:  ± 1.0 VAC       
Resolution: 0.1 VAC
RMS Current: 10.0 A
Peak Current: 50.0 A

Optional

750 VA Single Phase   

1500 VA Single Phase

3000 VA Single Phase   

4500 VA Single Phase

6000 VA Single Phase   

2250 VA Three Phase   

4500 VA Three Phase

9000 VA Three Phase

13500 VA Three Phase

18000 VA Three Phase

ELECTRONIC AC LOADS

Standard

Power:

1250 Watts Single Phase

Voltage:

0 - 280 VAC

Current:

0 - 15.0 AAC

Frequency:

50,60, 400 Hz

Modes:

Constant-Current, Crest Factor
Constant Resistance,  Short Circuit


Optional

Single/Three Phase - Parallel 300 Watts up to 1500 Watts

Single/Three Phase - Parallel 1250 Watts up to 5000 Watts

SOFTWARE

	Operating System:	Industry Standard MS Windows 
	
	APG for Windows™ 	High Performance Multi-Tasking Software
				System that includes such features as:
	Design And Repair Testing (DART)  Allows manual control of the UPT-2000 using the keyboard
	and/or a Mouse Providing:

INTERFACES


Operator:	Super VGA monitor, Mouse control, DART instrument control,
		front panel switches, system power, UUT power.
UUT:		Unit Under Test adapted with industry standard 
		connectors in a functionally logical interface matrix.
Selftest:	Hardware and software for full test and calibration using
		6˝ digit system meter as traceable reference standard
		(optional)

OPTIONS

  Auxiliary Multi-Channel AC Load Switching

        Distortion Analyzers

        Tektronix Digital Storage Oscilloscopes

        Digital Multimeter - 6˝ Digit

        AC Power Sources - Variac/Solid State AC, 1F & 3F

        Relay Interface additions

        PCI IEEE-488 interface

        Computer & Peripheral Upgrades

        SNMP Communications

        Complete Turn-Key Programs and Fixtures

Specifications subject to change without notice

MS DOS and Windows are Trademarks of Microsoft Corporation.


For printable specifications on the 
Autotest UPT-1000 UPS Tester, 
download (click on) the UPT-1000 product data and specifications sheet.

You will need Adobe Acrobat Reader to access the product data sheet.  
You can download the Acrobat Reader free by clicking on 

 

 

Please contact the 
Autotest  Sales Sales Department 
for immediate information

Return to ATE Products

Return to AUTOTEST Home Page


Copyright © 1995-2003, Autotest Company, All Rights Reserved