UPT 2000 
Universal UPS Production Tester

UPS technological advancements have resulted in high performance power supplies that are less costly and easier to manufacture. Today's UPS provides computer ports, not only for network communications, but also for configuring, calibrating and testing the UPS. But is there ATE available to Calibrate and Test them? The UPT 2000 from Autotest Company provides the ultimate in UPS ATE technology. By taking full advantage of its power supply ATE instrumentation, Autotest has developed a Universal UPS Tester with custom configuration instrumentation to meet almost any test scenario.

The UPT 2000 is enhanced by Autotest's APG for Windows™, the industry accepted software standard. This versatile and powerful ATE software package combines the power of the Microsoft Windows™ platform with the flexibility and precision of Autotest's modular instrumentation systems. APG's Application Specific language approach, along with interactive program creation, diagnostics modules and the DART (Design and Repair Testing) real-time control and display system, combine to take full advantage of the UPT 2000's instrumentation superiority. This provides the fast, user-friendly universal testing approach demanded by state-of-the-art ATE users.

UPT 2000 standard configurations may be used as sub-assembly or final asssembly UPS testers, with the ability to automatically provide stimulus and measurement calibration and verification. With the versatility of the Windows based software, the UPT 2000 can download configuration and calibration data as part of the computer interactive UPS assembly test program.

Enhanced UPT 2000 Test Abilities Include:

• Calibration and Configuration Download

• RS232 Communications

• SNMP Communications

• UPS Logic Status

• Crest Factor AC Load Regulation

• On Line Efficiency

• On Battery Efficiency

• Short Circuit Protection

• Battery Bus Status

• THD
  

Autotest UPT 2000 Specifications

CONTROLLER

CPU:

Pentium

Memory:

Current standard dynamic RAM

Current  standard fixed Hard Drive

3 ˝, 1.44 MB Diskette Drive
CD Rom Drive

Video:

Super VGA Color Monitor

Mouse and Keyboard:

Industry compatible

Peripheral I/O:

RS 232C, parallel interface, PCI-IEEE-488

(additional parallel/serial ports, and modem available)

MEASUREMENT SYSTEM - SIMULTANEOUS LINE SOURCE:

UPS Source

RMS voltage, RMS current, peak current,

peak Inrush current, True power

UPS Output

RMS voltage, RMS current, peak current,

peak Inrush current, True power

Optional:

DC Bus

DC voltage, DC current, peak current,

peak Inrush current, Load power

UNIVERSAL TIMER COUNTER:

Modes: Frequency, Time Interval, Totalizer

DIGITAL DRIVER/RECEIVER INTERFACE:

16 TTL/RS422 drivers/receiver w/ programmable references

SOURCES AND LOADS

SOLID STATE AC SOURCE

Standard

Power:	1500 VA Single Phase
Voltage:	0 - 270 VAC
Accuracy:	0.5% F.S.
Resolution:	0.1 VAC
RMS Current:	15.0 A
Peak Current:	42.0 A
Frequency:	45 to 6500 Hz

Optional

3000 VA Single Phase	4500 VA Single Phase
2250 VA Three Phase	4500 VA Three Phase
9000 VA Three Phase	13500 VAThree Phase

ELECTRONIC AC LOADS

Standard

Power:		1250 Watts Single Phase
Voltage:	0 - 280 VAC
Current:	0 - 15.0 AAC
Frequency:	50,60, 400 Hz
Modes:			Constant-Current, Crest Factor Constant Resistance,  Short Circuit

Optional
Single/Three Phase - Parallel 1250 Watts up to 5000 Watts

DC SOURCES (Optional)

	Voltages:		0 - 35 VDC, 0 - 56 VDC, 0 - 75 VDC, 0- 110 VDC
	Power:			700 Watts, 1125 Watts, 2250 Watts, 3375 Watts
	Battery Boast:		24 VDC, 36 VDC, 48 VDC , 60 VDC
	Peak Current:		42.0 A
	Frequency:		45 to 6500 Hz

ELECTRONIC DC LOADS (Optional)

	Power:			150 Watts , 500 Watts, 1000 Watts, 1500 Watts,  2000 Watts
	Modes:			Constant-Current, Constant Voltage,
				Constant Resistance,  Short Circuit

SOFTWARE

	Operating System:	MS Windows '95
	APG for Windows™ 	High Performance Multi-Tasking Software
				System that includes such features as:

• Expandability with named Procedure and Function definitions similar to ATLAS.
• Library and data management facilities comparable to Modula-2 and DODs ADA.
• A powerful editor and complete debugging facilities with statement-by-statement inspection of an executing program.

Design And Repair Testing (DART)
	Allows manual control of the UPT-2000 using the keyboard
	and/or a Mouse Providing:

• A Real Time Display of all measurement systems.
• Control of all system resources through pull down menus and dialogue windows.
• Individual Instrument Windows to provide a Multi-Media style test system control of all test instruments.

INTERFACES

Operator:	Super VGA monitor, Mouse control, DART instrument control,
		front panel switches, system power, UUT power.
UUT:		Unit Under Test adapted with industry standard 
		connectors in a functionally logical interface matrix.
Selftest:	Hardware and software for full test and calibration using
		5˝ digit system meter as traceable reference standard
		(optional)

OPTIONS

Auxiliary Multi-Channel AC Load Switching

Programmable DC Loads & Sources

Distortion Analyzers

Tektronix Digital Storage Oscilloscopes

Digital Multimeter

High Frequency Matrix

AC Power Sources - Variac/Solid State AC, 1 & 3

Relay Interface additions

Programmable Resistor Module

PCI IEEE-488 Instruments

Computer & Peripheral Upgrades

SNMP Communications

Complete Turn-Key Programs and Fixtures

For printable specifications on the 
Autotest UPT 2000 UPS Tester, 
download (click on) the UPT 2000 product data and specifications sheet.

Please contact the 
Autotest  Sales Department 
for immediate information

Return to ATE Products

Return to AUTOTEST Home Page

Copyright © 1995 - 2003,  Autotest Company, All Rights Reserved.